The IQAir Cleanroom H13 hospital air cleaning system is specifically designed for the removal of solid and liquid airborne particles and aerosols.
The IQAir Cleanroom H13 air cleaner is predominantly used for airborne infection control in healthcare settings and the control of particulate matter in cleanroom type applications.
It’s large, high capacity filtration media enables the IQAir Cleanroom H13 to deliver more ultra clean air than any comparable air cleaner.
HyperHEPA
All IQAir Cleanroom H13 filtration units are individually tested and certified for their high whole system filtration efficiency, and each HyperHEPA H13 particulate filter is also tested and certified for its high efficiency.
Each filter in the IQAir Cleanroom H13 air cleaner uses a micro pleat filtration media with solvent free separators, capturing and retaining the most harmful particles in the air with a filtration efficiency of up to 99.95% at 0.0003 µm.
The anti-microbial treated filters also effectively destroy microorganisms such as bacteria, fungi and protozoans, making the IQAir Cleanroom H13 air cleaner ideal for all healthcare applications.
EvenFlow Diffuser
Conventional air cleaners return filtered air into the environment through a small, noisy outlet. The IQAir Cleanroom H13 is designed with a 320-degree EvenFlow™ Diffuser to supply more air in more directions without draughts or noise.
This wide dispersion pattern allows the IQAir Cleanroom H13 air cleaner to produce a high air delivery rate with very little disruption to the airflow in a room.
HVAC Independent
IQAir Cleanroom H13 air filtration systems are standalone units, which operate independently with existing HVAC environments. They enable localised control of specific problems wherever they occur. Temporary deployment is achieved without installation due to the “plug and play” nature of the units.
Isolation Rooms InFlow/OutFlow
The IQAir Cleanroom H13 high performance air cleaning units can be equipped with a range of accessories for use in the specific applications found in the healthcare sector. The IQAir InFlow attachment enables the IQAir Cleanroom H13 unit to create a positive pressure isolation room. The InFlow duct can also be connected to external through wall ventilation, providing a positive pressure isolation room with minimal building works and associated disruption.
The IQAir VM InFlow attachment combines the InFlow attachment with a wall mount, for secure and convenient installation.
Filtration Stages
The Cleanroom H13 removes particulate pollution over two filtration stages:
1. IQAir Cleanroom 100 Anti-Microbial PreMax Filter F8 (L)
The Anti-Microbial PreMax Filter removes coarse and fine particulate matter, thus protecting subsequent stages.
2. IQAir Cleanroom 100 Anti-Microbial HyperHEPA Filter H13 (L)
The Anti-Microbial HyperHEPA stage removes at least 99.97% of all particulate pollution 0.3 microns and larger. The H13 uses a larger PreMax filter than the Cleanroom 100 or 250 MG, which either extends the filter life or allows for higher contamination levels.
Specifications
| Filtration: |
99.97% for particles ≥ 0.3 micron (μm) |
| Airflow Rate: |
Speed 1 - 65 m3/h
Speed 2 - 120 m3/h
Speed 3 - 190 m3/h
Speed 4 - 270 m3/h
Speed 5 - 370 m3/h
Speed 6 - 530 m3/h |
| Room Size: |
Up to: 265 m3 |
| Noise Level: |
LPA = 22-57 dBA / LWA = 32-67 dBA |
| Dimensions Without / With Packaging: |
82 x 41 x 38 cm / H 94 x W 45 x D 48 cm |
| Power Usage: |
20 to 135 watts |
| Weight: |
21 kg |
| Filter Service Life: |
PreMax Filter F8 (L): 12 months (approx)
HyperHEPA Filter H13 (L): 24-36 months (approx) |