Medorex 2-channel multi function controller was developed and produced for the use in the medical analytical biotechnological bacterial and industrial tests and applications. The controller has a high function variety and meets all expectations of the users regarding of the control and measurement of the pH-, redox-, ion and temperature- values.
Qualities
The multifunction controller is equipped with a splash-proof membrane keybord with menu line, a practical cabinet on feet and a large LCD graphics display. The functions of multifunction controller are as follows:
- Simultaneous display of two measured values.
- Simultaneous display of two temperature values.
- Times and dates display.
- The continuous online help selection in one of four languages.
- Automatically calibrations with 9 pre-programmed and two custom pH buffer sets.
- Recalibrations in running processes.
- Automatic or manual adjustment of temperatures and automatic adaptations to PT100/1000.
- Continuous measurements, even after the interruption of the control.
- Potential free inputs for differential measurements.
- On / off or proportional controls.
- Connection to 4 dosing pumps via programmable relays.
- Password protection of settings.
- Storing the minimum and maximum values.
- Stores up to 1200 measured values with date and times.
- Display of stored data as graphics.
- Printer output at adjustable intervals.
- Analogue or digital interfaces RS 232.
- Networking possibility with other pH- and pO2-controllers and computers.
Technical Data
Display
|
LCD, 128 x 64 Pixel
|
Keyboard
|
6 buttons, splash-proof
|
Ranges
|
pH 0 - 14 pH
mV ± 2000 mV
Ion 0,01 ng/l - 99,9 g/l
Temperature range 0 - 130 °C
|
Resolution
|
0.01 pH, 1 mV, 0.1 °C
|
Input
|
2 x pH for pH/mV/Ion-Electrodes
2 x Temp. for Pt 100 or pt 1000
|
Output
|
4 x programmable relays, 230 V, 0.5 A
2 x analogue 4-20 mA, max. 350 Ω
|
Temp. comp.
|
Manuel or automatic Pt 100/1000
|
Power supply
|
AC 230 V, 4 VA
|
Cabinet
(W x D x H)
|
226 x 216 x 76 mm
|
Weight
|
1.400 g
|