Membrane distillation plants provide water for the world's poorest

Lack of water causes great distress among the population in large parts of Africa and Asia. Small decentralized water treatment plants with an autonomous power supply can help solve the problem: They transform salty seawater or brackish water into pure drinking water.

Large industrial plants for the desalination of seawater deliver 50 million cubic meters of fresh water every day – particularly in the coastal cities of the Middle East. However, the technology is complex and consumes large amounts of energy. It is not suitable for the arid and semiarid regions of Africa and India, though these are the very places where it is becoming increasingly difficult to supply drinking water, particularly in rural areas. “The regions have a very poor infrastructure. Quite often there is no electricity grid, so conventional desalination plants are out of the question,” states Joachim Koschikowski of the Fraunhofer Institute for Solar Energy Systems ISE in Freiburg. In various EU-funded projects over the past few years, he and his team have developed small, decentralized water desalination plants that produce fresh drinking water with their own independent solar power supply.

“Our plants work on the principle of membrane distillation,” explains Koschikowski. This can best be explained by the principle of a Gore-Tex jacket, in which the membrane prevents rainwater from penetrating through to the skin. At the same time, water vapor formed inside the jacket by perspiration is passed through to the outside. “In our plant, the salty water is heated up and guided along a micro-porous, water-repellent membrane. Cold drinking water flows along the other side of the membrane. The steam pressure gradient resulting from the temperature difference causes part of the salt water to evaporate and pass through the membrane. The salt is left behind, and the water vapor condenses as it cools on the other side. It leaves us with clean, germ-free water,” says Koschikowski.

The researchers have so far built two different systems, both with their own energy supply. “Our compact system for about 120 liters of fresh water per day consists of six square meters of thermal solar collectors, a small photovoltaic module to power a pump, and the desalination module itself,” explains Koschikowski. In the dual-circuit system, on the other hand, several desalination modules are connected in parallel, enabling several cubic meters of water to be treated every day. One cubic meter of drinking water – 1000 liters – will cost about 10 euros. “When you think how much the inhabitants currently have to pay for the same amount of bottled water or soft drinks, the plant will pay off very quickly,” claims Koschikowski. The test plants in Gran Canaria and in Jordan have been operating successfully for some time. The researchers are therefore planning to market the plants through a spin-off known as “SolarSpring” from the middle of this year.

Comments

  1. Don Garretson Don Garretson United States says:

    I need your help to get started.  I have been interested in converting salt water into usable clean water for many years.  I have some ideas that have entrenched themselves in my brain that I need to get rid of.  I need to know the names and locations of a few salt water distillation plants.  A couple in East Africa, a couple around South Africa, a couple in Eastern United States, and a couple in Western United States.  The size of the company and its location are very important.  I would prefer companies that are trying to provide drinking water to cities and for irrigating purposes -- rather then companies who are bottling water.  If you can help me out with this or at least point me in the right direction -- I sure would appreciate it.  Don Garretson, 31394 Gaddy Rd., Macomb, Oklahoma, 74852 or phone 405-333-2466. Thanks.

  2. Salamander Salamander Australia says:

    Yes it is really possible to make drinkable water out of saline water. There exist some power plants where the process is going.
    First they pump the water from the sea to huge storage tanks and this water after filtering it will be pumped to the boiler unit where it will be heated and boiled. than the water steam produced will be sucked by the turbine and circulate in a system (network) till it cool down than stored in tanks waiting to take it to labs for adding all the chemicals.

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of News Medical.
Post a new comment
Post

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.

You might also like...
CKMT2 regulates mitochondrial function and energy metabolism in type 2 diabetes