Manufacturing News and Research

RSS

Manufacturing is the production of products across all industries, on a large-scale, using machinery.

Cost of ‘repurposing’ existing drugs to treat COVID-19

The paper looks at repurposed drugs that might demonstrate efficacy against COVID-19, and if they could be manufactured profitably at very low costs to ensure affordable access to vital treatments for COVID-19 at low prices globally.

13 Apr 2020

FDA approves new Rutgers saliva test for coronavirus

The FDA has granted emergency use authorization to Rutgers' RUCDR Infinite Biologics and its collaborators for a new collection approach that utilizes saliva as the primary test biomaterial for the SARS-CoV-2 coronavirus, the first such approval granted by the federal agency.

13 Apr 2020

Effective porous plastic filters for respiratory devices

Porvair Sciences reports on increased demand for the 3D moulded intake filters and vent diffusers it supplies to GCE Healthcare - manufacturer of the Zen-O lite™ Portable Oxygen Concentrator.

From Porvair Sciences Limited 13 Apr 2020

Little to lose - time for everyone to wear face masks for COVID-19

The CDC says it's time to encourage everyone to wear cloth face masks as a precaution against the spread of the COVID-19 disease pandemic. "We have little to lose, and potentially something to gain," say researchers in linked pieces in the prestigious journal, The BMJ.

12 Apr 2020

Lasers turn metal surfaces into bacteria killers

Purdue University researchers have discovered a laser treatment to texture metals that can potentially transform almost any metal surface into one that quickly eliminates any bacteria that come into contact with it.

12 Apr 2020

New clinical trial launches to test efficacy of cell therapy for severe COVID-19 cases

After a lightening round of proposals and reviews, an international team of scientists led by Dr. Camillo Ricordi was granted immediate FDA authorization for a 24-patient clinical trial to test the safety and exploratory efficacy of umbilical cord-derived mesenchymal stem cells to block the life-threatening lung inflammation that accompanies severe cases of COVID-19.

11 Apr 2020

Microneedle patches for potential COVID-19 vaccines or therapeutics

The COVID-19 pandemic is spreading over the world, causing panic and illness on a scale unprecedented in one hundred years. Even while the death toll nears 100,000, with over 1.5 million confirmed cases worldwide, public health experts and medical professionals are battling it using all the weapons available. Unfortunately, these are all too few.

9 Apr 2020

Simplified ventilator for COVID-19 patients designed by particle physicists

An international team of particle physicists have paused their search for dark matter to focus on the needs of victims of the global pandemic -- in particular, their need to breathe.

9 Apr 2020

3D printing silicone for breathing apparatus to help handle the COVID-19 pandemic

The COVID-19 pandemic is exhausting the healthcare resources of many countries, both developed and developing. With the escalating volume of patients who need intensive care and ventilation, breathing masks have become a high-priority item that many medical companies are racing to fill orders for in many parts of the world.

9 Apr 2020

University Hospital Trust in Paris installs 60 Stratasys 3D printers to support frontline staff battling COVID-19

Ensuring its frontline medical staff are equipped with the appropriate equipment during the ongoing COVID-19 pandemic, the University Hospital Trust in Paris, France, has invested in a fleet of 60 industrial-grade Stratasys FDM 3D Printers. All of them arrived on Tuesday, 31 March, within 24 hours of ordering.

From Stratasys 9 Apr 2020

Effective porous plastic filters for respiratory devices

Porvair Sciences reports on increased demand for the 3D molded intake filters and vent diffusers it supplies to GCE Healthcare - manufacturer of the Zen-O lite Portable Oxygen Concentrator.

From Porvair Sciences Limited 8 Apr 2020

Hospitals receive a large quantity of protective face shields from TU Graz

The protection of medical staff is a major priority in the current corona crisis. However, face masks and protective clothing are difficult to obtain in suitable quality on the world market these days.

7 Apr 2020

Preclinical trials for two coronavirus vaccine candidates commence

Scientists at CSIRO, Australia’s national science body, and the Australian Animal Health Laboratory (AAHL) in Geelong, Victoria, have commenced preclinical trials for two novel coronavirus vaccine candidates.

7 Apr 2020

Bill and Melinda Gates fund potential vaccine against COVID-19

In a race against time, teams of scientists across the world are working towards developing an effective and safe vaccine to prevent infection from the SARS-CoV-2 virus that causes COVID-19 disease.

7 Apr 2020

Cranfield University helps design simple, low-cost ventilators for critically-ill COVID-19 patients

A simple, low-cost Bag Valve Mask (BVM) ventilator to help critically-ill COVID-19 patients has been rapidly designed by experts at Cranfield University (UK) and built in Georgia Tech (USA) in a matter of days.

6 Apr 2020

Acute-19 becomes first bi-level turbine ventilator for patients affected by COVID-19

The first prototype of a bi-level turbine ventilator for pressure-monitored ventilation in patients affected by COVID-19, Acute-19, developed by Spanish researchers, has just successfully surpassed the validation phase in an animal model at the CEU Cardenal Herrera University of Valencia.

6 Apr 2020

NPL to support companies developing and manufacturing ventilators

The National Physical Laboratory, in its role as the UK’s National Metrology Institute, has been supporting industry for 120 years by maintaining the national and primary measurement standards and related services.

6 Apr 2020

STEMCELL launches 'My Status' app to help keep staff safe during COVID-19 pandemic

OutSystems announced that STEMCELL Technologies has launched its "My Status" app to help keep STEMCELL staff safe during the COVID-19 pandemic.

6 Apr 2020

Promega GoTaq Probe 1-Step RT-qPCR System approved for use in CDC’s COVID-19 Emergency Use Authorization diagnostic panel

Promega Corporation’s GoTaq Probe 1-Step RT-qPCR System is now in a Centers for Disease Control and Prevention COVID-19 diagnostic protocol for emergency use.

From Promega Corporation 6 Apr 2020

New design will allow manufacturers to mass-produce PPE for health care workers

In just under two weeks, researchers at the University of Massachusetts Amherst, with engineers, nurses and other health care professionals, have developed a design informed by clinical feedback for protective plastic face shields as the nation combats the spread of the coronavirus.

5 Apr 2020